3D Tech Supplies Australia

FAQ 0

Getting Started 0

Polysher 2

• What materials can I post-process in the Polysher?
• What solvents / liquids can I use in the Polysher?

Nebulizer Issues 3

• The Nebulizer Warning Light is on, what should I do?
• Nebulizer Self-priming
• Nebulizer mist is abnormally low

My Polysher is Leaking 3

• The Polysher is leaking from the base.
• The Polysher is leaking from the gasket.
• There is a strong alcohol smell during polishing

The Polysher shut down by itself. 1

• The Polysher shut down by itself.

Results 2

• My models aren't very smooth after long polishing cycles
• Strange thicker lines appear after polishing

Troubleshooting PolySmooth 2

• My PolySmooth prints are warping
• Strange thicker lines appear after Polyshing

Printing PolySmooth on UP 3D Printers 2

• Nozzle Jams with PolySmooth on UP Plus 2 and UP Mini 2
• Nozzle Jams with PolySmooth on my UP Box / UP Box+