Nebulizer Issues
If this happens during a polishing cycle, first try pressing the control knob and rotating it clockwise to start a new polishing cycle. If the problem persi...
Thu, 8 Jun, 2017 at 12:50 PM
Early versions of the Polysher manual mention that manual priming is necessary. From customer feedback, Polymaker found that priming wasn't required and...
Thu, 8 Jun, 2017 at 12:53 PM
In a typical polishing cycle, the alcohol mist should fill the entire chamber within several minutes. If, however, the mist volume is observed to be low, or...
Thu, 8 Jun, 2017 at 12:26 PM