Turn on the Polysher, open it, turn it off, unplug the power cable, hook the transparent casing on the top, empty the tank using the suction pipette, leave the Polysher dry for 2 days in a ventilated area, make sure the gasket fits properly in place, fill the tank with alcohol, prime the nebulizer, put back the cover properly in place, plug the power cable, turn on the PolysherTM, close it, start a polishing cycle for 20min. If some alcohol is still leaking out from the gasket, clean it with a tissue, slightly open the Polysher, adjust the cover and try one more time a 20min polishing cycle.
If the problem cannot be solved by the process above please provide the following information in a support ticket with a description of the problem.
- video showing the process described above
- serial number of the machine