One important variable when polishing is the strength of your Isopropyl Alcohol. While over 70% IPA is required for the polishing process, Polymaker recommend over 90% for the best results. It is also important that your part is printed with Polymakers PolySmooth filament as non PVB based materials will not be affected by Isopropyl Alcohol.
My models aren't very smooth after long polishing cycles Print
Created by: Matt
Modified on: Thu, 8 Jun, 2017 at 12:43 PM
Did you find it helpful? Yes No
Send feedbackSorry we couldn't be helpful. Help us improve this article with your feedback.